Morco Products Ltd open flued water heaters - critical safety upgrade alert
The BSS is supporting Morco, in its on-going campaign to find and fix potentially dangerous models of its LPG water heaters that may leak gas with the risk of causing fires or explosions.
Following concerns that appliance test-point screws may not have been correctly tightened at the time of commissioning or servicing, Morco has issued a safety alert and is offering free upgrades for the affected models.
Morco’s concern is that un-rectified water heaters can potentially leak unburnt gas that could cause fires or explosions that may result in burns and injuries.
What is the hazard?
Morco has identified a potential fire risk on their Primo 6 (MP6), Primo 11 (MP11), EUP6 and EUP11 LPG open flued water heaters. Gas leaking from an installation test-point could ignite and causing the plastic bezel and control knobs at the front of the water heater to catch fire and melt.
The models affected were sold between 2018 and 2023.
What to do if you think one of the water heaters may be installed on your boat.
Go to the Morco website to check if the appliance is one of the affected ones. It includes a guide on how to find the model number and serial number, Morco’s guide.
If confirmed as one needing an upgrade, then fill in a Safety Upgrade Form that will help Morco ratify the need to act and for them to organise an approved Gas Safe registered engineer to make the required safety upgrade to the water heater which will be free of charge.
Water heaters that have already had the safety upgrade should have a Morco branded yellow service notice sticker applied to the front face of the appliance including these words ‘Notice to commissioning engineer’ and a reference in the bottom left: Cod. 80000353 – ed.1
If you have any queries in relation to this safety upgrade, contact Morco directly on 01482 325456 or at gaswaterheaters@morcoproducts.co.uk.
Morco stresses that if the LPG water heater is suspected to be leaking gas, the supply should be disconnected and Morco or a suitably qualified Gas Safe registered engineer contacted straightaway.
The Boat Safety Scheme urges anyone with a Morco water heater to check their model and year against the very clear information on the Morco website and get in touch with Morco if they are at all unsure and need help.
If they spot one of the affected water heaters installed on a boat, we are asking BSS Examiners to have a conversation with their customers and ask whether it has had the free safety upgrade. If it hasn’t, the boat owner will be encouraged to get in contact with Morco.
The BSS has an information page on the Morco Safety Upgrade Campaign with additional information on how this matter may affect BSS Examinations for a boat with one of the affected water heaters installed www.boatsafetyscheme.org/stay-safe-advice/known-recalls-safety-alerts/
CONTACT
Tuesday 6 August 2024